Frequently Asked Questions

Connecting a Personal Apple iPad to Clarendon 3 Networks
Last Updated a year ago

So you want to connect you Apple iPad Device to the WiFi at Clarendon 3.

If you are using a personal device, please connect to Clarendon3-Guest. This will allow limited internet access for research, email, and other connectivity.

If you are a Clarendon 3 Faculty Member, we allow a less filtered connection through our Guest network. Please follow the instructions below to submit a help desk for adding your device.

Adding your Device To The Clarendon 3 Faculty Filter


In order to enable your device to use our Faculty filter, you will need to do the following:

1. Verify the Name Of Your Device


When your device connects to a network, it is identified by its hostname. The defualt hostname is unrecognizable to technology staff, so we need to change it to be easily identifiable to its owner.

  • On your device, tap Settings > General > About
  • Tap the first line, which displays the name of your device.
  • Rename it to be firstinitiallastname-iPad.
  • Example: John Doe would name his device jdoe-iPad.

2. Locate The MAC Address For Your Device


Your device's Wi-Fi interface has a permanent, unique serial number called a media access control (MAC) address.Clarendon 3 requires your MAC address if you wish to connect to our Guest network as a staff member, or to connect to certain Wi-Fi networks.

This is important: You should not share your MAC address with anyone except authorized IT personnel. MAC addresses are unique and permanent, but they can also be spoofed by others. Please only give out your mac address through our District Support sites!

  • From the home screen, tap Settings.
  • Tap General.
  • Tap About.
  • The iPad's MAC address - referred to as the Wi-Fi Address in iOS settings - is displayed on the screen.
Make a record of the MAC Address (xx:xx:xx:xx:xx:xx)


3. Create A Help Desk Request With The Information


Go to our Support Site and create a ticket with your contact information. In the Issue Summary field, Enter Add My Device To Faculty Filter. In the Issue Detail box, please list the Device name and MAC address.

Please Wait!

Please wait... it will take a second!